The ESU SwitchPilot Decoder is especially optimised for the stationary use on your layout. Regardless of what you prefer, the usual twin coil magnetic switches, switching electrical light signals or an ultra-modern servo control: One of the SwichtPilot decoders will “fit”.

SwitchPilot 3

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.

SKUDescription
51830SwitchPilot 3, with 4 Outputs
Link: https://www.esu.eu/en/products/switchpilot/switchpilot-3/

SwitchPilot 3 Plus

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.

SKUDescription
51831SwitchPilot 3 Plus, with 8 Outputs, No Feedback
Link: https://www.esu.eu/en/products/switchpilot/switchpilot-3-plus/

SwitchPilot Servo

SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives.

SKUDescription
51832SwitchPilot 3 Servo, with 8 Outputs
Link: https://www.esu.eu/en/products/switchpilot/switchpilot-3-servo/

SwitchPilot Extension

SwitchPilot Extension enriches your SwitchPilot with a total of 4 twin relays. It is ideal for the tricky switching of functions.

SKUDescription
51801SwitchPilot Extension, 4 Twin Relays (DPDT) Output, 2A Each
Link: https://www.esu.eu/en/products/switchpilot/switchpilot-extension/

Signal Adapter For SwitchPilot

Our SwitchPilot decoders cannot only control point mechanisms but also daylight signals. Most modern signals are equipped with LEDs.

SKUDescription
51809SwitchPilot Adaptor for signals with common cathode, Set of 2 for 8 Outputs
Link: https://www.esu.eu/en/products/switchpilot/signal-adapter-for-switchpilot/

ABC Braking Section Adapter For SwitchPilot Extension

These adaptor boards greatly simplify set-up and wiring of ABC braking sections. They are simply plugged into the terminals of a SwitchPilot Extension.

SKUDescription
51808SwitchPilot Extension Adapter for ABC Brake Sections, Set of 2 for 4 Brake Sections
Link: https://www.esu.eu/en/products/switchpilot/abc-braking-section-adapter-for-switchpilot-extension/

Linearservo

This linear servo in the dimensions 26mm x 22.5mm x 10.8mm is mainly intended for installation in electric locomotives for pantograph operation.

SKUDescription
51806Linear Servo, 4.5mm Movement, 0.3m, with fittings
Link: https://www.esu.eu/en/products/switchpilot/linearservo/

Precision Servo Motor

With the Precision Servo Motor you are also able to move your switches, railroad crossing and your engine shed´s door quietly and ranky.

SKUDescription
51804Servo Kit, with Plastic Gears & mounting kit
Link: https://www.esu.eu/en/products/switchpilot/precision-servo-motor/

Precision Servo Motor – Metal

With the servo motor you are also able to move your switches, railroad crossing and your engine shed´s door quietly and ranky.

SKUDescription
51805Servo Kit, with Metal Gears & mounting kit
Link: https://www.esu.eu/en/products/switchpilot/precision-servo-motor-metal/

Servo Extension Cable

To extend your servo motor…

SKUDescription
51810Servo Extension Cable, 0.75m
Link: https://www.esu.eu/en/products/switchpilot/servo-extension-cable/

SignalPilot

The ESU SignalPilot decoder is a multi-protocol decoder designed primarily for switching daylight signals. It has 16 outputs to which micro lamps or LEDs (with series resistors) can be connected directly. Because all outputs are designed as push/pull output stages, both daylight signals with common anode as well as daylight signals with a common earth connection (common cathode) are suitable, as is the case with Viessmann® signals. Motorised semaphore signals and turnout drives can also be operated with the SignalPilot.

SKUDescription
51840SignalPilot, with 16 Outputs
Link: https://www.esu.eu/en/products/signalpilot/